Product Overview
COMMANDO AirONE series Bridge comes with Super Wds mode where bridge can act as Ap+ Gateway+ Mesh+ Repeater+ Bridge, all in one at a same time with up to 4 bridges connected at a same time. All bridges act as master and slave simultaneously. With this Super WDS meshing of bridges makes network failure rate to zero. It enables communication between wireless and wired computers/laptops and mobile devices in the network. It complies with IEEE 802.11ac standard and is backward compatible with IEEE 802.11b/g/n standard along with build in MIMO High Gain 18/15/11 dBi Internal Antenna as per model. All Bridges Supports HI-MAX TDMA Technology which use polling technique to solve the hidden node and resource waste problem between the CPE and base station. It provides low latency, high throughput in PTP/PTMP/MTMP application likes IP camera, long range Wi-Fi Transmission) with Beamforming Technology.
It has separate Gigabit 1 WAN & 1 LAN port IP65 Waterproof and Dust proof Enclosure casing. It enables the connection of two or more different local area network (LAN) segments by bridging a wireless connection between them. It works much like a wired network bridge and is used to connect LANs that are logically separated and/or located in different physical locations. It is primarily used in corporate LANs, which often span across geographical locations. At the back-end the wireless bridges are connected to the LAN switch or router. For the two network segments to communicate, each data packet travels from the local Ethernet/router to the wireless bridge, which wireless broadcasts it to the wireless bridge of the other LAN segment. Besides point-to-point bridging, a wireless bridge can also be connected to more than one (Up to 4) wireless bridge simultaneously forming a mesh network. Unlike traditional enterprise Wi-Fi systems that required a controller. It comes as a standalone device.
It is designed for the Outdoors with weather-resistant IP65 case specifically for outdoor installations. It has 4 in 1 mode Access Point with Gateway, Repeater, Super WDS and Wireless AP mode with range up to 10 Kms with up to 500mW input Power. It is industrial grade Bridge with great communication efficiency, equipped with separate Gigabit WAN & LAN port which enhances the sharing of files, photo, audio, video and gaming experience over wireless network.
It can also be used as DHCP server and works as layer 3 device when configured in gateway mode. It can identify and determine the correct transmission speed and half/full duplex mode of the attached devices. It also supports standard Auto-MDI/MDI-X that can detect the type of connection to any Ethernet device without requiring special straight or crossover cables, Store-and-Forward forwarding scheme to ensure low latency and high data integrity.
Product Highlights
- Support Super WDS mode, device can act as AP as well as Bridge both simultaneously and can connect multi point to multi point connection to other bridges and APs (Up to 4).
- Supports IEEE 802.11ac 5GHz Wireless bands.
- Multiple Operational Modes like Gateway Mode, Super WDS Mode, Repeater mode, AP mode. All COMMANDO AirONE series Bridge default mode is Super WDS mode. In 10KM bridge also support WISP mode.
- Dual input for power either POE IN or DC power inputs.
- IEEE 802.1q Tag based VLAN
- Support Enterprise security : WPA, WPA2, 802.1x RADIUS
- Supports IEEE 802.11ac 5GHz Wireless with inbuilt 18/15/11 dBi gain Antenna panel antenna with RF input Power up to 500mW.
- Support wireless RF power adjustable as per user movements from bridge.
- Supports intelligent load balance based on users.
- Support seamless roaming and low rate terminal access.
- Support inbuilt Wi-Fi channel analyzer.
- Dual purposes WAN or LAN port supporting 1x 10/100/1000Mbps.
- Supports Wi-Fi client distance up to 10Km depending on surrounding conditions.
- Support Open or encryption like WPA/WPA2-PSK
- Plug and Play design simplifies installation with self-adaption.
- Compact IP65 casing comes with ABS waterproof, dust proof and sunscreen shell which avoid the damage from dust & rainy weather. Meantime, it is adaptive to various environment.
- Silent design perfect for noise sensitive environments.
- With Zero Touch Provisioning: Plug and play and no setup. Affordable, Easy-to-Use AP for Small Business Networks, with Zero Configuration Required.
- Built-in High-Performance Processor with long life, Suitable for Deployment of Large Scale Commercial Scenarios
- Comes with one-year default warranty – optionally extendable up to 3 years.
Features and Benefits
Multiple Operational Modes
It has 4 in 1 mode like Gateway Mode, Super WDS Mode, Repeater mode, AP mode. All COMMANDO AirONE series Bridge default mode is in Super WDS mode. In 10KM bridge has 5 in 1 mode, it also supports WISP mode.
Super WDS mode
It supports Super WDS mode device can act as AP as well as Bridge both simultaneously and can connect multi point to multi point connection to other bridges and AP’s (Up to 4). In this mode bridge can act as Ap+ Gateway+ Mesh+ Repeater+ Bridge, all in one at a same time with up to 4 bridges connected at a same time. It can act as AP as well as Bridge both simultaneously and can connect other bridges and APs.
Gigabit LAN speed
It provides and offers a wide range of models for different network deployment requirements with gigabit speed. Auto-negotiation senses the link speed of a network device in wired 10, 100, or 1000Mbps.
Easy to Use
COMMANDO AirONE Bridge are WEB GUI based easy to use and manage standalone device. It requires minimal configuration, so setup is simple and hassle-free. For wireless clients/users, it can intelligently adjust for compatibility and optimal performance by DFS. Its compact size makes it ideal for Outdoor desktops/wall/ceiling with limited space. Dynamic LED lights provide real-time work status display and basic fault diagnosis. Easy Installation, Plug-and-play installation with no configuration required.
Wireless speed for client and bridge
By setting channel bandwidth up to 20/40/80 MHz can increase the speed of bridge connection up to 900Mbps between bridges and also can check free channels available with inbuilt Wi-Fi analysis.
Weatherproof Enclosure with IP65
It has IP65 resilient weatherproof enclosure protects the access points against harsh outdoor condition. It comes with ABS waterproof, dust proof and sunscreen shell which avoid the damage from dust & rainy weather. Meantime, it is adaptive to various environment with ±6KV Lightning Protection with no Ingress of dust as well as water proof enclosure. These energy efficient Bridges are well built and rigorously tested and can sustain in very rough environment to provide the reliable performance.
Wi-Fi That Goes the Distance
Supports bridge distance of up to 10KM with (Point to Point) PTP/ (Point to Multi Point) PTMP /(Multi Point to Multi Point) MTMP. Designed for Point-to-Point and Point-to-Multipoint applications with 500mW high power and 18dBi MIMO high gain panel antenna which can greatly increase the Wi-Fi range to 10KM distance and supply stable Wi-Fi signal for users.
Network Security
Support Flexible user Access Control Policies. MAC Filtering function to block the access of illegal hosts. Access Rules can be applied to permit or deny Wi-Fi users.
Auto MDIX Capabilities
Auto sensing 10/100/1000 ports with auto MDIX capabilities which also removes speed and duplex mismatches automatically.
Compact and Silent Performance
It operates quietly, making it ideal for use in virtually any room or office. Perfect for noise sensitive environments.
Support uninterrupted critical network infrastructure
It has Dual power options with DC input power and POE IN power input which protect from power failures and increases life of device. It comes with Lighting surge protection Common mode ±6KV and Differential mode ±2KV. With this feature protect on cost and the impact to your business by losing these network devices and thus the users/servers connected to them.
Cost Efficient
State of art quality product that can serve on real time high-speed Performance with AC input power, highly reliable, conformance to international open standards , durable, serviceable, aesthetics, perceived quality, enhanced performance leads to value to money.
Green Technology
It features the energy-efficient Ethernet that can save power. It automatically adjusts power consumption according to the link status to limit the carbon footprint of your network. It also complies with RoHS, prohibiting the use of certain hazardous materials. Besides that most of the packaging material can be recycled and reused.