COMMANDO Scout E300 Series Unmanaged Switches Data Sheet

COMMANDO Scout E300 Series Unmanaged Switches consists of switches which are ideal for small to medium-sized businesses, internet cafes, hotels, schools, and others. They are easy to install and maintain and provide rich services, helping customers build secure, reliable, and high-performance networks. It is an economical way for SOHO and Small-to-Medium Businesses (SMB) to take advantage of Gigabit Ethernet speeds as well as PoE/PoE+ or 24V PoE capability while reducing energy consumption and minimizing noise. This series switches are available in 4 to 48 Gigabit Ethernet ports, 4 to 48 Fast Ethernet Ports with two either 1FE or 1GE copper/ 1G fiber Uplinks and also has 4 port SFP fiber switch model with 2GE uplinks. Designed for operational simplicity to lower total cost of ownership, they enable scalable access layer office and home operations.

It can be quickly set up with plug and play with Zero Touch Provisioning. It is unmanaged SOHO (Small Office/Home Office) Switches, are designed for Small Business Networks, unmanaged Switches empower your growing business instant flexibility with copper as well as fiber ports connectivity along with PoE/PoE+/24V PoE reliable performance at a very affordable cost. This switch provides Gigabit Ethernet high-speed network connectivity with duplex and speed auto-negotiation for optimal speed detection through RJ45 Category 5, 5e or 6 cables and supports up to 250m cable distance on copper ports and Up to 20Km on fiber ports.

It can identify and determine the correct transmission speed and half/full duplex mode of the attached devices. It also supports standard Auto-MDI/MDI-X that can detect the type of connection to any Ethernet device without requiring special straight or crossover cables, Store-and-Forward forwarding scheme to ensure low latency and high data integrity.

It supports Energy Efficient Ethernet (EEE), which enables the switch to enter a power-saving mode when traffic is light. Switches can smartly automatically adjust the PoE/PoE+/24V PoE power output for transmissions based on the cable length for PoE/PoE+/24V PoE devices connected. It can also set any ports that are not transmitting traffic to sleep mode.

 

Product Highlights

• 4 to 48 x 10/100Mbps or 10/100/1000Mbps Ethernet Ports along with fixed 2G fiber/ 2GE or 2FE copper Uplinks and PoE/PoE+/ Passive PoE & Non PoE Models.
• All 4 to 48 ports support auto-negotiation and auto MDI/MDIX.
• Extra Ports slots with flexible Ethernet Fiber/Copper Switchports or Uplinks.
• Enclosure Type either Desktop or Rack/Wall mountable - 1U.
• PoE/PoE+/ 24V PoE models to provide power on all ports to IEEE 802.3af, IEEE 802.3at and passive PoE capable PD devices which include Wireless AP, Bridges, IoT etc. having power budget up to 120W.
• Ports have both PoE/PoE+ capability with 30W Max Per port or 24V PoE power as per model.
• PD detection will automatically detect power for your PoE/PoE+ devices.
• Support Store-and-forward Switching with Backplane Bandwidth of 1Gbps to 96Gbps
• MAC address Table size of 2000 entries with Auto-Learning and Auto-Aging
• Easy Installation, Plug-and-play installation with no configuration required
• Support Store-and-forward Switching with Backplane Bandwidth of 1Gbps to 48Gbps
• Surge protection ±2 kV
• All ports support jumbo frame transmission.
• Plug and Play design simplifies installation with self-adaption.
• Compact, fan-less, silent design with Small form-factor. Perfect for noise sensitive environments.
• Energy-Saving by Energy Efficient Ethernet (EEE), which enables the switch to enter a power-saving mode when traffic is light.
• Automatically adjust the PoE/PoE+ power for connected PoE devices based on cable length.
• With Zero Touch Provisioning with Plug and play and no setup.
• Affordable, Easy-to-Use Switches for Small Business Networks, with Zero Configuration Required

PoE/PoE+ Capabilities

COMMANDO Scout E300 Series Switches some models Support up to 120W (PoE/PoE+) Power Budget. This series switches smartly adjust IEEE802.3af/ IEEE802.3at (PoE/PoE+) with up to 30 watts per port. All ports in PoE/PoE+ capable switch allows Power-over-Ethernet (PoE /PoE+) to connect and power PoE/PoE+ capable cameras, Wireless access points, VoIP phones, IoT and all PoE/PoE+ capable devices using just Ethernet cabling.

 

Passive PoE Capabilities

COMMANDO Scout E300 Series Switches some models Support up to 120W non-standard form of PoE used to power over the Ethernet cable, but no negotiation or communication process is required. Passive PoE doesn't conform to any IEEE standards usually refers to any device using PoE that is not 802.3af or 802.3at such as wireless bridges, cameras and radio antennas that run on 24V PoE, It does not perform a handshake, So it is extremely important to know what PoE voltage your device requires before plugging in the Ethernet cable and powering it up. If you connect the wrong voltage you may cause permanent electrical damage to the device.

 

Auto MDIX capabilities

Auto sensing/Auto PoE/PoE+ 10/100 or 10/100/1000M ports with auto MDIX capabilities which also removes speed and duplex mismatches automatically as well as covers larger physical distance with copper pairs compared to other brands best switches. 

 

Compact, Fan-less and Noise-less performance

Small form-factor, fan-less design for silent operation. Perfect for noise sensitive environments.

 

Green Technology

It features the energy-efficient Ethernet that can save power. It automatically adjusts power consumption according to the link status to limit the carbon footprint of your network. It also complies with RoHS, prohibiting the use of certain hazardous materials. Besides that, most of the packaging material can be recycled and reused.

 

Easy to Use

COMMANDO Scout E300 Series Switches are easy to use and manage. All switches are unmanaged, Plug-and-Play devices that requires no configuration, so setup is simple and hassle-free. It is having desktop or rack mounting /wall mounting enclosure option as per model basis. Auto MDI/MDI-X crossover on all ports eliminate the need for crossover cables or uplink ports. Auto-Negotiation on each port senses the link speed of a network device (Either 10, 100 or 1000) and smartly adjusts for compatibility and optimal performance. Its compact size makes it ideal for desktops with limited space. Dynamic LED lights provide real-time work status display and basic fault diagnosis.

 

Compact Design with Flexibility of additional ports
The switches provide additional deployment flexibility, fiber connectivity for easy expansion of your networks up to 20Km with fiber connectivity. So, you can directly connect to a high-performance storage server or deploy a long-distance uplink to another switch.

 

Longer Distance Coverage

State of art quality switches that can serve real time high-speed performance which covers longer physical distance up to 250 meters with copper pairs compared to other brands.

 

Supports Uninterrupted Critical Network Infrastructure

It has DC input power to enable UPS to mitigate power supply failures. It automatically senses when the internal power supply of a connected device fails and provides power to that device, preventing loss of network traffic and support critical network infrastructure. These series Switches protect from power surges through their inline power supply automatically and have in build Surge protection of ±2KV. With this feature protect on cost and the impact to your business by losing these network devices and thus the users/servers connected to them.

 

Cost Efficient

State of art quality product that can serve on real time high-speed Performance with AC input power which covers larger physical distance with copper pairs compared to other brands best switches and are highly reliable, conformance to international open standards, durable, serviceable, aesthetics, perceived quality, enhanced performance with larger range with copper cables up to 250m and usability leads to value to money.