COMMANDO AirACE Series Wireless Bridge comes with default AP mode where bridge be step up by keeping one device in CPE mode and one device in AP mode. It supports speed up to 300Mbps with IEEE 802.11a/n standard along with build in MIMO 8~13dBi Internal Panel Antennas as per model. All Bridges Supports HI-MAX TDMA Technology which use polling technique to solve the hidden node and resource waste problem between the AP and Base Station. It provides low latency, high throughput in PTP application likes IP camera, long range Wi-Fi Transmission) with Beamforming Technology. It can have Multi SSID up to 4.

It has IP65 Waterproof and Dust proof Enclosure casing with 24V Passive PoE power input. It enables the connection of two or more different local area network (LAN) segments by bridging a wireless connection between them. It works much like a wired network bridge and is used to connect LANs that are logically separated and/or located in different physical locations. It is primarily used in corporate LANs, which often span across geographical locations. At the backend, the wireless bridges are connected to the LAN switch or router. For the two network segments to communicate, each data packet travels from the local Ethernet/router to the wireless bridge, which wireless broadcasts it to the wireless bridge of the other LAN segment. Besides point-to-point bridging, unlike traditional enterprise Wi-Fi systems that required a controller. It comes as a standalone device.